EverGuard® TPO HW Membrane
Self-Adhering Roofing Membrane
EverGuard® Freedom™ TPO HW is a self-adhered membrane with a heat weldable seam available in 45 mil and 60 mil thickness in 2 versatile colors: ENERGY STAR® qualified white and earth tone tan. Freedom™ membranes combine EverGuard® ’s proven TPO technology with an added engineered adhesive preapplied to the bottom of the sheet for quick, hassle-free installation. Freedom™ HW membrane includes a traditional 3” heat weldable seam. Freedom™ membranes are especially suited for schools and hospitals, high-rises and limited access buildings, and coastal locations and areas subject to extreme wind conditions. Advantages include no open flames or hot asphalt on your roof and the factory-applied adhesive eliminates guesswork or uncertainty by the installer, resulting in uniform application.
Applicable Standards
UL Listed, FM Approved, Dade County Product Approval, Florida Building Code Approved, CRRC Listed, Title 24 Compliant, ENERGY STAR® Listed, ASTM D6878.
|
|
|
|
1. Certain data is provided in MD (machine direction) x CMD (cross machine direction) format.
2. Data is based upon typical product performance, and is subject to normal manufacturing tolerance and variance |
| Nominal Thickness |
ASTM D-751 |
0.039" (min.) |
0.045" |
| Breaking Strength |
ASTM D-751 Grab Method |
220 lbf/in |
290 lbf x 270 lbf |
| Factory Seam Strength |
ASTM D-751 |
66 lbf |
100 lbf (membrane failure) |
| Elongation at Break |
ASTM D-751 |
15% |
30% |
| Heat Aging |
ASTM D-573 |
90% Retention of Breaking Strength and Elongation at Break |
100% |
| Tear Strength |
ASTM D-751 8" x 8" Sample |
55 lbf |
124 lbf x 140 lbf |
| Puncture Resistance |
FTM 101C Method 2031 |
Not Established |
290 lbs. |
| Cold Brittleness |
ASTM D-2137 |
-40 C |
-40 C |
| Permeance |
ASTM E-96 |
Not Established |
0.070 Perms |
| Dimensional Change |
ASTM D-1204 @158 F, 6 hrs. |
+/- 1% |
0.4% |
| Water Absorption |
ASTM D-471 @158 F, 1 week |
+/- 3.0% max. |
0.7% |
| Hydrostatic Resistance |
ASTM D-751Method D |
Not Established |
390 psi |
| Ozone Resistance |
ASTM D-1149 |
No visible deterioration @ 7 x magnification |
No visible deterioration @ 7 x magnification |
| Reflectivity (white) |
ASTM C1549 |
N/A |
0.76 |
| Emissivity (white) |
ASTM C1371 |
N/A |
0.90 |
Product Data
|
| Colors |
Full Roll Size |
Full Roll Weight |
Half Roll Size |
Half Roll Weight |
| White, Tan, Gray |
|
45 |
60 |
80 |
|
45 |
60 |
80 |
| 10'x50' |
150 |
190 |
230 |
5'x50' |
74 |
101 |
120 |
| 10'x100' |
301 |
365 |
450 |
5'x100' |
148 |
192 |
230 |
| Note: Membrane rolls shipped horizontally on pallets. |
|
|
| Store on pallets in a clean, dry area at temperatures below 100°F; protect adhesive side from exposure to direct sunlight; and use care when handling the adhesive side of material. The adhesive is aggressive and will stick to skin. Properly stored material should retain a shelf life of 18 months post manufacture. |
|
| Membrane rolls are heavy. Position and install by at least two people. |
| Note: Product sizes, dimensions, and widths are nominal values and are subject to normal manufacturing/packaging tolerance and variation |
* White Membrane Only
