TPO Roofing - Self-Adhered Roofing Accessories

Self-Adhered Accessories


Universal Corner
Universal Corners

• One standard size

• Can be cut to accommodate use as either an inside or outside corner reinforcement

• Molded to 60 mil thickness from TPO
Specifications
Size 4” x 4” with Flange
Thickness .060”
Shipping Specifications
Corners per Carton 6
Weight per carton 6 lbs
Cartons per pallet 60
Product SKUs
White 7730920
Tan 7730820
Gray 7730345

 

TPO Expansion Joint
TPO Expansion Joints

• Available in 5 Standard bellows widths

• Available in 2 styles (Wall-to-roof and Roof-to-roof)

• Custom sizes and colors also available
Product Information
EverGuard® TPO expansion joints are provided in roof-to-roof or roof-to-wall configurations. Standard roll length is 50 feet. The membrane thickness is 60 mil nominal
Measuring Tips
When ordering TPO expansion joints it is important to specify the correct bellows width
  1. Measure the opening distance of the joint
  2. Multiply this distance by 1.5
  3. Round up to next even number, this is the bellows width
Example
Width = 3.325"
Multiply 3.325 X 1.5 = 4.9875
Order next even number larger bellows = 6"

 

Square Tube WrapSquare Tube Wrap

• Available in 3 standard sizes

• Custom sizes and colors also available

• Includes stainless clamp for top edge seal
Specifications
Size 4” x 4” with Flange
Thickness .060”
Shipping Specifications
Pieces per box 6
Weight per box 6.0 lbs (4” x 4”)
  6.5 lbs (4” x 6”)
  7.0 lbs (6” x 6”)
Boxes per pallet 24
PRODUCT SKUs
EverGuard® TPO Square Tube Wrap 4x4 8506920
EverGuard® TPO Square Tube Wrap 4x6 8508920
EverGuard® TPO Square Tube Wrap 6x6 8507920

 

Split Pipe BootSplit Pipe Boots

• Available in 3 standard sizes

• Custom sizes and colors also available*
Specifications Item
Dimensions/SKU #
For pipe sizes 1”x 2” 85G1920 For pipe sizes 1”x 2” 85G1920
  3”x 5” 85G292
  6”x 8” 85G3920
Shipping Specifications
Boots per Box 6 6
Weight per box:  
1”– 2” 7.5lbs
3”– 5” 7.5lbs
6”– 8” 11lbs
Boxes per Pallet:  
1”– 2” 36
3”– 5” 36
6”– 8” 24

* Contact your local representative for details.

 

Corner Curb WrapCorner Curb Wraps

• Available in 4 standard sizes

• Available in white, gray, and tan

• Custom sizes and colors also available*
Specifications
Height 12”
Base 6”
Length 13.5”, 19.5”, 25.5”, 31.5”
Shipping Specifications
Curbs per box 4 6
Weight per box:  
13.5” 5.6 lbs
19.5” 7.4 lbs
25.5” 10.7 lbs
31.5” 12.5 lbs
Boxes per Pallet: 32
PRODUCT SKUs
White 13.5” 85F2920
White 19.5” 85F3920
White 25.5” 85F4920
White 31.5” 85F5820

 
TPO DrainTPO Drain
Product Information
EverGuard® pre-flashed TPO drains are constructed from spun aluminum and pre-flashed using EverGuard® 55mil detailing membrane. No special tools needed for installation. Wide range of sizes allow for proper fit into any size roofing drain. All hardware, including strainer and gravel guard, are included with drains. MSEAL watertight expanding seal, for retrofit drains, is included making plumbing tie in quick and easy.
Recommended Uses
  • Whole sized Drains (2”, 3”, 4”, 5” or 6”) can be used on new construction and directly attached to new plumbing with a flexible coupling (not included).

  • Half-inch sized Drains (1 1/2”, 2 1/2”, 3 1/2”, 4 1/2”, and 51/2”) can be used as retrofit drains by ordering a drain sized 1/2” smaller than the drain pipe being fitted (for a 4” drain pipe use a 3 1/2” drain).

 

Vent BootVent Boots

• One standard size accommodates most common pipes and conduits

• Supplied with stainless steel clamping rings
Specifications
Membrane Thickness .75”
For Pipe Sizes 1” - 6” dia.
Shipping Specifications
Boots per Carton 6 6
Weight per carton 9 lbs 9 lbs
Cartons per pallet 54 54
PRODUCT SKUs
Vent Boot White 771920
Vent Boot Tan 771820
Vent Boot Gray 771345

 

Pourable Sealer PocketPourable Sealer Pocket

• Perfect for irregular roof penetrations

• Fill with EverGuard® TPO pourable sealer or
TOPCOAT® Flex Seal for the perfect finish.

• Available in custom colors and sizes*
Specifications
Total Width of Pocket 12”
Total Length of Pocket 15 ¼”
Height of Walls 4”
Shipping Specifications
Box Size 28” x 12” x 12”
Pieces per box 6
Weight per box 6.5 lbs
Boxes per pallet 16
Pallet Size 42” x 42”
PRODUCT SKUs
White 8002

* Contact your local representative for details.

 

Fluted CornerFluted Corner

• Manufactured to accommodate imperfect corners

• Designed for ease of welding in tight areas

• Fluted Corners are formed using unreinforced membrane to a nominal 50 mil thickness

Specifications
Diameter 8”
Nominal thickness .050”
Shipping Specifications
Corners per Carton 20
Weight per Carton 2.5 lbs
Cartons per pallet 250
Product SKUs
TPO Fluted Corner White 8A00920
TPO Fluted Corner Tan 8A00820
TPO Fluted Corner Grey 8A00345

Inside CornerInside Corner

• Manufactured to accommodate inside corners of base and curb flashings

• Designed for ease of welding in tight areas

• Inside Corners are formed using unreinforced membrane to a nominal 50 mil thickness
Specifications
Membrane Thickness .050”
Corner Dimensions 6” x 6” x 5 1/4”
Shipping Specifications
20 Corners per Carton 3.5lbs/carton
Cartons per pallet 54
Product SKUs
Inside Corner White 8509920WA
Inside Corner Grey 8509345WA
Inside Corner Tan 8509820WA

Documents